Tag Archives: Print1-P3

Using the candle image. This image from the previous section didn’t come out terribly well so I decided to use it as a base to add more layers. I thinned my light yellow ink and printed a light wash over … Continue reading →

Multicolour prints – three layers. All prints are on 110gsm cartridge paper except the ghost print which is on 80gsm photocopy paper. Using one of my green prints previously shown I offset the mask and printed the grey eagle.  Once … Continue reading →

Multicolour prints – first layer. After the recent printing issues I’ve simplified my process by choosing to use just plain 110gsm cartridge paper for the start of this exercise, as detailed in my previous post, because I feel my problems … Continue reading →

I’ve cut a simple candle design that I drew earlier in the course to see if a less detailed shape will give better print results.  Frankly, at this point, I’m not looking at the artistic side of my designs, I’m … Continue reading →

Here I am combining both positive and negative masks within each print, thereby achieving a two coloured outcome, hopefully accurately aligned.  In my last project I used plastic coated paper to make my masks but am using photocopy paper for … Continue reading →